Mower features:
1, high efficiency: Usually each mower, mowing 8 × 667m2 per day or more, and their effectiveness is quite artificial weeding (daily 0.5 × 667m2) 16 times.
2, good benefits: Because mower rotation speed, good cutting effect on the weeds in orchards, particularly the effect of cutting high weeds on the tender better. Usually weeding three times a year, can basically meet the requirements of weeding.
3, soil and water: the use of artificial hoe weeding, weeding at the same time due to the loose topsoil, it tends to cause some erosion in Tikan artificial weeding, soil erosion will be more serious. The use of lawn mowers, weed and cut off the ground because only part of the weeds, little effect on the soil surface, with solid roots in the soil effect on soil and water conservation is extremely beneficial.
4, increase fertility: The mower weeding, the weeds to grow to be only after a certain height, cut a large number of weeds can cover the orchard, but also when the orchard of organic fertilizer to increase soil fertility.
Use: apply to the plains, hills, terraced fields, orchards, such as the size triangle plots reed, alfalfa, fish, grass and other weeds, simple operation and high efficiency.
Mower use technical points. Use mower weeding, the weeds to grow to 10-13 cm is better. As weeds grow too high and should be done in two steps, first cut the upper part, and then cut off portion. When using the mower, you should put your hands on, and to maintain a certain inclination of fruit trees on one side, to make the cut side of fruit falling weeds as possible. Open throttle speed, uniform forward, save fuel and improve work efficiency.
Use
1、Before mowing mower, mowing must first clear the debris within the region, so as not to damage the trimmer head, blade. Cold state to start the engine, the throttle should be closed, then open the throttle to start in due course. If the area is too large turf mower continuous working time should not exceed 4 hours.
2、mower after use, they should be fully cleaned and check all the screws are tightened, the blade or without defects, repair high voltage caps and so on, but also to strengthen the vulnerable parts of the inspection in accordance with the useful life of the mower or replace.